Hirschmann RS20 User Manual page 147

Network Load Control
show vlan brief
Max. VLAN ID................................... 4042
Max. supported VLANs...........................
Number of currently configured VLANs...........
VLAN 0 Transparent Mode (Prio. Tagged Frames).. Disabled
VLAN ID VLAN Name
---- -------------------------------- --------- ------------------
1 VLAN1
2 VLAN2
3 VLAN3
 Configuring the ports
Figure 34: Defining the VLAN membership of the ports.
 Assign the ports of the device to the corresponding VLANs by
clicking on the related table cell to open the selection menu and
define the status. The selection options are:
 - = currently not a member of this VLAN (GVRP allowed)
 T = member of VLAN; send data packets with tag

U = Member of the VLAN; send data packets without tag
 F = not a member of the VLAN (also disabled for GVRP)
Because terminal devices usually interpret untagged data packets
exclusivly, you select the U setting here.
 To temporarily save the changes, click "Set".
 Open the
UM BasicConfig L2E
Release 8.0 05/2013
Switching:VLAN:Port
Display the current VLAN configuration.
VLAN Type VLAN Creation Time
Default
Static
Static
dialog.
8.6 VLANs
255
3
0 days, 00:00:05
0 days, 02:44:29
0 days, 02:52:26
147