Hirschmann RS20 User Manual page 90

Assistance in the Protection from
Unauthorized Access
Note: The Command Line Interface (out-of-band) and the
Security:Telnet/Web/SSH Access dialog in the graphical user
interface allows you to reactivate the Telnet server.
6.2.4 Description of Web Access (http)
The device's Web server allows you to configure the device by using the
graphical user interface. You can deactivate the Web server to prevent Web
access to the device.
The server is activated in its default setting.
After you switch the http Web server off, it is no longer possible to log in via
a http Web browser. The http session in the open browser window remains
active.
6.2.5 Enabling/disabling Telnet/Web Access
6.2.6 Switching Telnet/Internet/SSH access on/off
The Web server copies a Java applet for the graphical user interface onto
your computer. The applet then communicates with the device by SNMPv3
(Simple Network Management Protocol). The Web server of the device
allows you to configure the device using the graphical user interface. You can
switch off the Web server in order to prevent the applet from being copied.
90
6.2 Password for SNMP access
UM BasicConfig L2E
Release 8.0 05/2013