Hirschmann RS20 User Manual page 97

Assistance in the Protection from
Unauthorized Access
 In the table, click on the row of the port to be protected, in the
"Allowed IP addresses" cell.
 Enter in sequence:
– the IP subnetwork group: 10.0.1.228
– a space character as a separator
– the IP address: 10.0.1.229
Entry: 10.0.1.228 10.0.1.229
 In the table, click on the row of the port to be protected, in the
"Action" cell, and select portDisable.
Figure 20: Port Security dialog
 Save the settings in the non-volatile memory.
 Select the dialog
Basic Settings:Load/Save.
 In the "Save" frame, select "To Device" for the location and click
"Save" to permanently save the configuration in the active
configuration.
UM BasicConfig L2E
Release 8.0 05/2013
6.4 Port access control
97