Hirschmann RS20 User Manual page 93

Assistance in the Protection from
Unauthorized Access
enable
# ip https server
# ip https port <port_no>
# no ip https server
# ip https server
# show ip https
# ip https certgen
# copy
tftp://<server_ip>/<path_to_
pem> nvram:httpscert
# no ip https server
# ip https server
The device uses HTTPS protocol and establishes a new connection.
When the session is ended and the user logs out, the device terminates
the connection.
Note: The device allows you to open HTTPS- and HTTP connections at
the same time. The maximum number of HTTP(S) connections that can
be open at the same time is 16.
UM BasicConfig L2E
Release 8.0 05/2013
6.2 Password for SNMP access
Switch to Privileged EXEC mode.
Switch on HTTPS-server.
Set the HTTPS port number for a secure HTTP
connection.
- As-delivered state: 443.
- Value range: 1-65535
If you change the HTTPS port number, switch the
HTTPS server off and then on again in order to
make the change effective.
Optional: Show the status of the HTTPS server
and HTTPS port number.
Create X509/PEM certificates.
Upload an X509/PEM certificate for HTTPS using
TFTP.
After uploading the HTTPS certificate, switch the
HTTPS server off and then on again in order to
activate the certificate.:
93