Network Load Control
show vlan brief
Max. VLAN ID................................... 4042
Max. supported VLANs...........................
Number of currently configured VLANs...........
VLAN 0 Transparent Mode (Prio. Tagged Frames).. Disabled
VLAN ID VLAN Name
---- -------------------------------- --------- ------------------
1
VLAN1
2
VLAN2
3
VLAN3
Configuring the ports
Figure 38: Defining the VLAN membership of the ports.
Assign the ports of the device to the corresponding VLANs by
clicking on the related table cell to open the selection menu and
define the status. The selection options are:
- = currently not a member of this VLAN (GVRP allowed)
T = member of VLAN; send data packets with tag
U = Member of the VLAN; send data packets without tag
F = not a member of the VLAN (also disabled for GVRP)
Because terminal devices usually interpret untagged data packets,
you select the U setting. You select the Tsetting on the uplink port on
which the VLANs communicate with each other.
Click "Set" to save the changes temporarily.
154
Display the current VLAN configuration.
VLAN Type VLAN Creation Time
Default
Static
Static
8.6 VLANs
255
3
0 days, 00:00:05
0 days, 02:44:29
0 days, 02:52:26
UM BasicConfig L2E
Release 8.0 05/2013