Faulty Device Replacement - Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual
Industrial ethernet gigabit switch
Hide thumbs
Also See for MS30, Power MICE, MACH 4000, OCTOPUS:
- Reference manual (572 pages) ,
- User manual (294 pages) ,
- Programming manual (116 pages)
Table of Contents
Advertisement
Entering the IP parameters
2.9 Faulty Device Replacement
There are two plug-and-play solutions available for replacing a faulty Switch
with a Switch of the same type
(Faulty Device Replacement):
D
First, you can configure the new switch using an AutoConfiguration
Adapter
(see
"Loading the system configuration from the ACA" on page
D
Second, you can configure the new switch using DHCP Option 82
(see
"Entering the IP parameters via HiDiscovery" on page
In both cases, the same configuration data which the faulty Switch had are
transferred to the new Switch during booting.
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05
2.9 Faulty Device Replacement
37)or
35).
49
Advertisement
Table of Contents
