Hirschmann RS20 User Manual page 146

Network Load Control
Figure 33: Creating and naming new VLANs
 Click on "Create" to open the window for entering the VLAN ID.
 Assign VLAN ID 2 to the VLAN.
 Click "OK".
 You give this VLAN the name VLAN2 by clicking on the field and
entering the name. Also change the name for VLAN 1 from Default
to VLAN1.
 Repeat the previous steps and create another VLAN with the VLAN
ID 3 and the name VLAN3.
enable
vlan database
vlan 2
vlan name 2 VLAN2
vlan 3
vlan name 3 VLAN3
vlan name 1 VLAN1
exit
146
Switch to the privileged EXEC mode.
Switch to the VLAN configuration mode.
Create a new VLAN with the VLAN ID 2.
Give the VLAN with the VLAN ID 2 the name
VLAN2.
Create a new VLAN with the VLAN ID 3.
Give the VLAN with the VLAN ID 3 the name
VLAN3.
Give the VLAN with the VLAN ID 1 the name
VLAN1.
Leave the VLAN configuration mode.
8.6 VLANs
UM BasicConfig L2E
Release 8.0 05/2013