Saving In A Binary File On A Url - Hirschmann RS20 User Manual

Loading/saving settings
3.2.2

Saving in a binary file on a URL

The device allows you to save the current configuration data in a file in the
connected network.
Note: The configuration file includes all configuration data, including the
password. Therefore pay attention to the access rights on the tftp server.
 Select the
Basics: Load/Save dialog.
 In the "Save" frame, click "to URL (binary)"
to create a binary file.
 In the "URL" frame, enter the path under which you want the device
to save the configuration file.
The URL identifies the path to the tftp server on which the device saves
the configuration file. The URL is in the format
tftp://IP address of the tftp server/path name/file name
(e.g. tftp://10.1.112.5/switch/config.dat).
 Click "Save".
enable
copy nvram:startup-config
tftp://10.1.112.159/
switch/config.dat
62
Switch to the privileged EXEC mode.
The device saves the configuration data in a
binary file on a tftp server in the connected
network
3.2 Saving settings
UM BasicConfig L2E
Release 8.0 05/2013