Entering the IP Parameters
2.9 Faulty device replacement
The device provides two plug-and-play solutions for replacing a faulty device
with a device of the same type (faulty device replacement):
Configuring the new device via an AutoConfiguration Adapter
page 38 „Loading the system configuration from the ACA")
Configuration via DHCP Option 82
Server Option
In both cases, when the new device is started, it is given the same configu-
ration data that the faulty device had.
Note: If you replace a device with DIP switches, please ensure that the DIP
switch settings are identical.
Basic Configuration L2P
Release 4.2 07/08
82").
2.9 Faulty device replacement
(see on page 196 „Setting up DHCP
(see on
or
51