Configuring Acd; Displaying Acd - Hirschmann RS20 User Manual

Operation Diagnosis
9.8.2

Configuring ACD

 Select the Diagnostics:IP Address Conflict Detection dialog.
 With "Status" you enable/disable the IP address conflict detection or
select the operating mode
9.8.3

Displaying ACD

 Select the
Diagnostics:IP Address Conflict Detection dialog.

In the table, the device logs IP address conflicts with its IP address.
The device logs the following data for each conflict:
 the time („Timestamp" column)
 the conflicting IP address („IP Address" column)

the MAC address of the device with which the IP address conflicted („MAC
Address" column).
For each IP address, the device logs a line with the last conflict that
occurred.
 During a restart, the device deletes the table.
Figure 46: IP Address Conflict Detection dialog
UM BasicConfig L2E
Release 8.0 05/2013
9.8 Detecting IP Address Conflicts
(see table 22).
181