Hirschmann RS20 User Manual page 148

Network Load Control
Figure 35: Assigning and saving "Port VLAN ID", "Acceptable Frame Types"
and "Ingress Filtering"
 Assign the Port VLAN ID of the related VLANs (2 or 3) to the
individual ports - see table.
 Because terminal devices usually send data packets as untagged,
you select the admitAll setting for the "Acceptable Frame Types".
 The setting for Ingress Filter does not affect how this example
functions.
 Click "Set" to save the changes temporarily.
 Select the
Basics: Load/Save dialog.
 In the "Save" frame, select "To Device" for the location and click
"Save" to permanently save the configuration in the active
configuration.
enable
configure
interface 1/1
vlan participation include 2 Port 1/1 becomes member untagged in VLAN 2.
vlan pvid 2
exit
148
Switch to the privileged EXEC mode.
Switch to the Configuration mode.
Switch to the Interface Configuration mode of
interface 1/1.
Port 1/1 is assigned the port VLAN ID 2.
Switch to the Configuration mode.
8.6 VLANs
UM BasicConfig L2E
Release 8.0 05/2013