Loading/saving settings
Note: When loading a configuration, hold off any accesses to the device until
it has loaded the configuration file and applied the new configuration settings.
Depending on the device type and the extent of the configuration settings,
this process can take between 10 and 200 seconds.
3.1.1
Loading from the local non-volatile memory
When loading the configuration data locally, the device loads the
configuration data from the local non-volatile memory if no ACA is connected
to the device.
Select the
Basics: Load/Save dialog.
In the "Load" frame, click "from Device".
Click "Restore".
enable
copy nvram:startup-config
system:running-config
UM BasicConfig L2E
Release 8.0 05/2013
Switch to the privileged EXEC mode.
The device loads the configuration data from the
local non-volatile memory.
3.1 Loading settings
55