Configuring The Hiper-Ring - Hirschmann rsb20 Reference Manual

Redundancy
6.1.1

Configuring the HIPER-Ring

For the ring ports, select the following basic settings in the Basic
Settings:Port Configuration dialog:
Port type Bit rate
TX 100 Mbit/s
Optical 100 Mbit/s
Table 21: Port settings for ring ports
Note: Configure all the devices of the HIPER-Ring individually. Before you
connect the redundant line, you must complete the configuration of all the
devices of the HIPER-Ring. You thus avoid loops during the configuration
phase.
86
Autonegotiation Port setting
(automatic
configuration)
off on
off on
6.1 Ring Redundancy
Duplex
100 Mbit/s full duplex (FDX)
100 Mbit/s full duplex (FDX)
RM Web L2B
Release 5.3 05/2012