IBM x3100 M5 Type 5457 Installation And Service Manual page 485

Hide thumbs Also See for x3100 M5 Type 5457:
Table of Contents

Advertisement

816f000f-2201ffff
The System [ComputerSystemElementName] has detected a POST Error deassertion. (ABR
Status)
Explanation: This message is for the use case when an implementation has detected that Post Error has deasserted.
May also be shown as 816f000f2201ffff or 0x816f000f2201ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0185
SNMP Trap ID: 50
Automatically notify Support: No
User response: If the specified sensor is one of the following, ABR Status, Firmware Error or Sys Boot Status: No
action; information only.
816f0013-1701ffff
System [ComputerSystemElementName] has recovered from a diagnostic interrupt. (NMI State)
Explanation: This message is for the use case when an implementation has detected a recovery from a Front Panel
NMI / Diagnostic Interrupt
May also be shown as 816f00131701ffff or 0x816f00131701ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0223
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f0021-2201ffff
Fault condition removed on slot [PhysicalConnectorElementName] on system
[ComputerSystemElementName]. (No Op ROM Space)
Explanation: This message is for the use case when an implementation has detected a Fault condition in a slot has
been removed.
May also be shown as 816f00212201ffff or 0x816f00212201ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0331
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f000f-2201ffff • 816f0021-2201ffff
Appendix A. Integrated management module II (IMM2) error messages
469

Advertisement

Table of Contents
loading

Table of Contents