IBM x3100 M5 Type 5457 Installation And Service Manual page 252

Hide thumbs Also See for x3100 M5 Type 5457:

Table of Contents

Figure 143. SATA connector location on system board for 4U server model with non-hot-swap

power supplies

System x3100 M5 Type 5457: Installation and Service Guide

6. Connect the hard disk drive signal cables to the SATA connectors on the

system board or the connector on the adapter (if one is installed).

Note: In the LSI RAID utility, SATA 1 represents hard disk drive in drive bay

two and SATA 2 represents hard disk drive in drive bay one (see "Replacing a

simple-swap hard disk drive" on page 217).

The following illustrations shows the SATA connectors on the system board:

7. Push hard disk drive cage in until the release latches click into place.

Troubleshooting