IBM x3100 M5 Type 5457 Installation And Service Manual page 118

v User Security
v Save Settings
v Restore Settings
v Load Default Settings
v Exit Setup
102
System x3100 M5 Type 5457: Installation and Service Guide
Select this choice to enter the POST event viewer to view the POST error
messages.
– System Event Log
Select this choice to view the system event log.
– Clear System Event Log
Select this choice to clear the system event log.
Select this choice to set, change, or clear passwords. See "Passwords" on page
103 for more information.
This choice is on the full and limited Setup utility menu.
– Set Power-on Password
Select this choice to set or change a power-on password. See "Power-on
password" on page 103 for more information.
– Clear Power-on Password
Select this choice to clear a power-on password. See "Power-on password" on
page 103 for more information.
– Set Administrator Password
Select this choice to set or change an administrator password. An
administrator password is intended to be used by a system administrator; it
limits access to the full Setup utility menu. If an administrator password is
set, the full Setup utility menu is available only if you type the administrator
password at the password prompt. See "Administrator password" on page
104 for more information.
– Clear Administrator Password
Select this choice to clear an administrator password. See "Administrator
password" on page 104 for more information.
Select this choice to save the changes that you have made in the settings.
Select this choice to cancel the changes that you have made in the settings and
restore the previous settings.
Select this choice to cancel the changes that you have made in the settings and
restore the factory settings.
Select this choice to exit from the Setup utility. If you have not saved the
changes that you have made in the settings, you are asked whether you want to
save the changes or exit without saving them.