IBM x3100 M5 Type 5457 Installation And Service Manual page 412

800b0108-1301ffff • 806f0007-0301ffff
800b0108-1301ffff Redundancy Lost for [RedundancySetElementName] has asserted. (Power Unit)
Explanation: This message is for the use case when Redundancy Lost has asserted.
May also be shown as 800b01081301ffff or 0x800b01081301ffff
Severity: Error
Alert Category: Critical - Redundant Power Supply
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0802
SNMP Trap ID: 9
Automatically notify Support: No
User response:
1. Check the LEDs for both power supplies.
2. Follow the actions in Power-supply LEDs.
806f0007-0301ffff [ProcessorElementName] has Failed with IERR. (CPU 1)
Explanation: This message is for the use case when an implementation has detected a Processor Failed - IERR
Condition.
May also be shown as 806f00070301ffff or 0x806f00070301ffff
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0042
SNMP Trap ID: 40
Automatically notify Support: No
User response:
1. Update the latest level of system firmware and device drivers are installed for all adapters and standard devices,
such as UEFI, IMM Ethernet,and SAS. Important: Some cluster solutions require specific code levels or
coordinated code updates. If the device is part of a cluster solution, verify that the latest level of code is
supported for the cluster solution before you update the code.
2. Run the DSA program.
3. Reseat the adapter.
4. Replace the adapter.
5. (Trained technician only) Replace microprocessor n. (n = microprocessor number)
6. (Trained technician only) Replace the system board.
396
System x3100 M5 Type 5457: Installation and Service Guide