Ibm Electronic Service Agent; Error Messages; Troubleshooting By Symptom - IBM x3100 M5 Type 5457 Installation And Service Manual

Hide thumbs Also See for x3100 M5 Type 5457:
Table of Contents

Advertisement

IBM Electronic Service Agent

IBM Electronic Service Agent monitors, tracks, and captures system hardware
errors and hardware and software inventory information, and reports serviceable
problems directly to IBM Support.
You can also choose to collect data manually. It uses minimal system resources,
and can be downloaded from the IBM website. For more information and to
download IBM Electronic Service Agent, go to http://www-01.ibm.com/support/
esa/.

Error messages

This section provides the list of error codes and messages for UEFI/POST, IMM2,
and DSA that are generated when a problem is detected.
See Appendix B, "UEFI/POST diagnostic codes," on page 501, Appendix A,
"Integrated management module II (IMM2) error messages," on page 327, and
Appendix C, "DSA diagnostic test results," on page 515 for more information.

Troubleshooting by symptom

Use the troubleshooting tables to find solutions to problems that have identifiable
symptoms.
About this task
If you cannot find a solution to the problem in these tables, see Appendix C, "DSA
diagnostic test results," on page 515 for information about testing the server and
"Running DSA Preboot diagnostic programs" on page 138 for additional
information about running DSA Preboot program. For additional information to
help you solve problems, see "Start here" on page 119.
If you have just added new software or a new optional device and the server is
not working, complete the following steps before you use the troubleshooting
tables:
Procedure
1. Check the system-error LED on the front information panel; if it is lit, check the
2. Remove the software or device that you just added.
3. Run IBM Dynamic System Analysis (DSA) to determine whether the server is
4. Reinstall the new software or new device.
140
System x3100 M5 Type 5457: Installation and Service Guide
light path diagnostics LEDs (see "Light path diagnostics" on page 126).
running correctly (for information about using DSA, see Appendix C, "DSA
diagnostic test results," on page 515).

Advertisement

Table of Contents
loading

Table of Contents