IBM x3100 M5 Type 5457 Installation And Service Manual page 191

Hide thumbs Also See for x3100 M5 Type 5457:

Table of Contents

Table 32. Structural parts for 4U server models with non-hot-swap power supplies, Type 5457 (continued)

Filler, PCI card

DVD drive retention bracket for 4U chassis

PCI adapter retention bracket for 4U chassis

Shield kit, simple-swap 3.5- inch hard disk drive

Chassis stand foot assembly

Miscellaneous hardware for rack

Rack kit assembly

Holder, battery (retainer)

Bottom cover

Rack chassis

Cable management arm

Miscellaneous hardware

Screw, four M3x5 screws

Friction slide

Remote RAID battery/power module tray

3U BRACKET KIT

EIA brackets

Side/top cover

The following structural parts are for 5U server models with hot-swap power

supplies. They are available for purchase from the retail store.

Table 33. Structural parts for 5U server models with hot-swap power supplies, Type 5457

Side cover with lock

Retention bracket (rear) for 5U chassis, adapter

5U chassis assembly

Bezel, upper

Bezel, lower (for 3.5" hard disk drives)

Bezel, lower (for 2.5" hard disk drives)

Hard disk drive cage, 3.5" drives

Hard disk drive cage, 2.5" drives

Filler, power supply

Filler, DVD-ROM Drive

Feet, chassis

EMC shield kit, optical disk drive/tape drive

Keylock, keyed-random

Kit, Retainer (for optical and diskette drives)

Filler, PCI card

Chapter 5. Parts listing, IBM System x3100 M5 Type 5457

Troubleshooting