Traceroute - Planet CS-2001 User Manual

32.2 Traceroute

Step 1. Under Monitoring > Diagnostic Tools> Traceroute the Traceroute
command can be used by the CS-2001 to send out packets to a specific
address to diagnose the quality of the traversed network.

In Destination IP / Domain name enter the destination address for the
packets.

In Packet size configure the size of each packet. (40 Bytes by default)

In Max Time-to-Live, enter the maximum number of hops. (30 by
default)

In Wait time, specify the duration to wait between successive pings. (2
seconds by default)

In Interface select the interface that the packets will originate from.

Click OK.
（Figure 30-5）
Figure 30-4 Traceroute Settings
820
（Figure 30-4）