Multi-channel support
10.2 Multi-channel editor
Settings for a program block
Display
Text
Spindle
Addit. run-in code
Automat. retraction
Procedure
554
Meaning
Block designation
S1
S2
Spindle assignment. Defines at which spindle a program block is to be
executed.
Yes
For the case that the block is not executed, as the specified spindle should
not be processed, then it is possible to temporarily activate a so-called
"Addit. run-in code".
No
Yes
Block start and block end are moved to the tool change point, i.e. the tool
is brought into a safe range.
No
1.
Select the "Program manager" operating area.
2.
Select the storage location and create a program or open a program.
The program editor is opened.
3.
Select the required program blocks, which you wish to combine to form
a block.
4.
Press the "Build group" softkey.
The "Build group" window is opened.
5.
Enter a designation for the block, assign the spindle, if required, select
the Addit. run-in code and the automatic retraction and then press the
"OK" softkey.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning