Softkeys on the machine control panel menu
Available softkeys:
"Machine" softkey
"[VAR]" softkey
"1... n CHANNEL"
softkey
"Single Block"
softkey
"WCS MCS" softkey Switch between WCS and MCS
"Back" softkey
Note
The window will automatically disappear when changing regions areas with the "Menu
Select" key.
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Select the "Machine" operating area
Select the axis feedrate in the variable increment
Change the channel
Switch single block execution on/off
Close the window.
19.3 Machine control panel menu
HT 8
753