Creating Screenshots - Siemens SINUMERIK 840D sl Operating Manual

Alarm, error and system messages

25.8 Creating screenshots

25.8 Creating screenshots
You can create screenshots of the current user interface.
Each screenshot is saved as a file and stored in the following folder:
/user/sinumerik/hmi/log/screenshot
Procedure
Ctrl + P
Copy file
830
Press the <Ctrl+P> key combination.
A screenshot of the current user interface is created in .png format.
The file names assigned by the system run in ascending order from
"SCR_SAVE_0001.png" to "SCR_SAVE_9999". You can create up to 9,999
screenshots.
1. Select the "Start-up" operating area.
2. Press the "System data" softkey and open the specified folder.
As you cannot open screenshots in SINUMERIK Operate, you must
copy the files to a Windows PC either via "WinSCP" or via a USB-
FlashDrive.
You can open the files using a graphics program, e.g. "Office Picture
Manager".
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning