Siemens SINUMERIK 840D sl Operating Manual page 115

Computerized numerical controllers

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Operating Manual, 02/2012, 6FC5398-8CP40-3BA0

Select the required axis in the "Retraction axis" selection box.

Use the traversing keys (e.g. Z +) to traverse the tool from the

workpiece according to the retraction axis selected in the "Retract Tool"

To exit the window, press the "Retract" softkey again when the tool is at

the desired position.

Working in manual mode

3.5 Manual retraction

Sinumerik 828d turning