Siemens SINUMERIK 840D sl Operating Manual page 30

Introduction
1.2 Operator panel fronts
Key
30
Function
+ <Cursor right> + <CTRL>
 Editing box
 Navigation
<Cursor left>
 Editing box
 Navigation
+ <Cursor left> + <CTRL>
 Editing box
 Navigation
<Cursor up>
 Editing box
 Navigation
+ <Cursor up> + <CTRL>
 Moves the cursor in a table to the beginning of the table.
 Moves the cursor to the beginning of a window.
+ <Cursor up> + <SHIFT>
In the program manager and in the program editor, selects a
contiguous selection of directories and program blocks.
Moves the cursor further to the right by one word.
Moves the cursor in a table to the next cell to the right.
Closes a directory or program (e.g. cycle) in the program
editor. If you have made changes, then these are accepted.
Moves the cursor further to the left by one character.
Moves the cursor further to the left by one word.
Moves the cursor in a table to the next cell to the left.
Moves the cursor into the next upper field.
– Moves the cursor in a table to the next cell upwards.
– Moves the cursor upwards in a menu screen.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning