Tool Data Oem - Siemens SINUMERIK 840D sl Operating Manual

16.7

Tool data OEM

You have the option of configuring the list according to your requirements.
Depending on the machine configuration, grinding-specific parameters are displayed in the
list with OEM tool data.
Grinding tool-specific parameters
Column heading
Min. radius
Actual radius
Min. width
Actual width
Max. speed
Max. peripheral velocity
Wheel angle
Monitoring
Tool base dimension
Spindle number
Param. rad.calc.
Chaining rule
References
You can find more information on grinding tools in the following manual:
Function Manual, Extended Functions W4: Grinding-specific tool offset and monitoring
functions / SINUMERIK 840D sl
Refer to the following document for more information on configuring OEM tool data:
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Meaning
Limit value for the radius of the grinding wheel to monitor the geometry.
Displays the sum of the geometry value, wear value and, if set, the base
dimension.
Limit value for the width of the grinding wheel to monitor the geometry.
The width of the grinding wheel measured, for example, after the
dressing.
Maximum speed
Maximum peripheral velocity
Angle of inclined wheel
Monitoring geometry and speed
Defines whether the base dimension is used when calculating the SUG
and when monitoring the minimum wheel radius.
Number of programmed spindle (e.g. grinding wheel peripheral velocity)
and spindle to be monitored (e.g. wheel radius and width).
Selects the parameter to calculate the radius
Length X

Length Y

Length Z

Radius

This parameter defines which tool parameters of tool cutting edge 2 (D2)
and tool cutting edge 1 (D1) have to be chained to one another. When
the value of a chained parameter is modified, then the other cutting edge
is automatically used when chaining the parameter.
Tool management
16.7 Tool data OEM
665