User variables
11.4 Displaying channel GUDs
Procedure
582
1.
Select the "Parameter" operating area.
2.
Press the "User variable" softkey.
3.
Press the "Channel GUD" and "GUD selection" softkeys.
A new vertical softkey bar appears.
4.
Press the "SGUD" ... "GUD6" softkeys if you want to display the SGUD,
MGUD, UGUD as well as GUD4 to GUD 6 of the channel-specific user
variables.
- OR -
Press the "Continue" softkey and the "GUD7" to "GUD9" softkeys if you
want to display GUD 7 to GUD 9 of the channel-specific user variables.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning