Multi-Channel View For Large Operator Panels - Siemens SINUMERIK 840D sl Operating Manual

9.3

Multi-channel view for large operator panels

On the OP015 and OP019 operator panels as well as on the PC, you have the option of
displaying up to four channels next to each one. This simplifies the creation and run-in for
multi-channel programs.
Constraints
● OP015 with a resolution of 1024x768 pixels: up to three channels visible
● OP019 with a resolution of 1280x1024 pixels: up to four channels visible
● The operation of a OP019 requires a PCU50.5
3- or 4-channel view in the "Machine" operating area
Use the multi-channel view settings to select the channels and specify the view.
Channel view
3-channel view
4-channel view
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Display in the "Machine" operating area
The following windows are displayed one above the other for each channel:
Actual Value window

T,F,S window

Block Display window

Selecting functions
The T,F,S window is overlaid by pressing one of the vertical softkeys.

The following windows are displayed one above the other for each channel:
Actual Value window

G functions (the "G functions" softkey is omitted). "All G functions" is

accessed with the Menu forward key.
T,S,F window

Block Display window

Selecting functions
The window showing the G codes is overlaid if you press one of the

vertical softkeys.
9.3 Multi-channel view for large operator panels
Multi-channel view
533