Different Workpiece Views For Multi-Channel Support - Siemens SINUMERIK 840D sl Operating Manual

Multi-channel support
10.3 Simulating machining
Procedure
10.3.2

Different workpiece views for multi-channel support

In the graphical display, you can choose between different views so that you constantly have
the best view of the current workpiece machining, or in order to display details or the overall
view of the finished workpiece.
The following views are available:
● Side view
● Half section
● Front view
● 3D view
● 2-window
562
1. Start the simulation.
2. Press the "Main spindle" softkey if you wish to view the main spindle.
- OR -
3. Press the "Counterspindle" softkey if you wish to view the
counterspindle.
4. If you have pressed the "Main spindle" and "Counterspindle" softkeys,
the simulation view is split into two and you can see the main spindle
and counterspindle simultaneously.
5. To toggle between the various channels, press the ">>" softkey and the
"Channel +" or "Channel -" softkey.
The status line informs you about the channel presently being
processed.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning