Siemens SINUMERIK 840D sl Operating Manual page 32

Introduction
1.2 Operator panel fronts
Key
32
Function
+ <END> + <CTRL>
Moves the cursor to the last entry in the last line of the actual
column or to the end of a program.
+ + <END> + <CTRL> + <SHIFT>
Moves the cursor to the last entry in the last line of the actual
column or to the end of a program.
Selects a contiguous selection from the cursor position up to the
end of a program block.
<BACKSPACE>
 Editing box
 Navigation
+ <BACKSPACE> + <CTRL>
 Editing window
 Navigation
<TAB>
 In the program editor, indents the cursor by one character.
 In the program manager, moves the cursor to the next entry
+ <TAB> + <SHIFT>
 In the program editor, indents the cursor by one character.
 In the program manager, moves the cursor to the next entry
<TAB> + <CTRL>
 In the program editor, indents the cursor by one character.
 In the program manager, moves the cursor to the next entry
<TAB> + <SHIFT> + <CTRL>
 In the program editor, indents the cursor by one character.
 In the program manager, moves the cursor to the next entry
Deletes a character selected to the left of the cursor.
Deletes all of the selected characters to the left of the cursor.
Deletes a word selected to the left of the cursor.
Deletes all of the selected characters to the left of the cursor.
to the right.
to the left.
to the right.
to the left.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning