Siemens SINUMERIK 840D sl Operating Manual page 625

Parameter
T
RP
C0
X0
Y0
Z0
Swivel mode
Axis sequence
X
Y
Z
X1
Y1
Z1
Note
Other additive transformations can be added to the offsets before (X0, Y0, Z0) or after (X1,
Y1, Z1) swiveling (see Section "Work offsets").
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Description
Tool identifier
Retraction plane for face B
Positioning angle for machining surface
Reference point for rotation
Reference point for rotation
Reference point for rotation
axis-by-axis: Swivel coordinate system axis-by-axis

Solid angle: Swivel via solid angle

Proj. angle: Swiveling via projection angle

Direct: Position rotary axes directly

Sequence of the axes which are rotated around - (only for axis-by-axis swivel
mode)
XYZ or XZY or YXZ or YZX or ZXY or ZYX
Axis angle
Axis angle
Axis angle
New zero point of rotated surface
New zero point of rotated surface
New zero point of rotated surface
The sequence of the axes can be
interchanged as required using the
Select key.
Working with a B axis
14.4 Swiveling
Unit
mm
Degrees
mm
mm
mm
Degrees
Degrees
Degrees
mm
mm
mm
625