Siemens SINUMERIK 840D sl Operating Manual page 36

Introduction
1.2 Operator panel fronts
Key
36
Function
<INPUT>
 Completes input of a value in the entry field.
 Opens a directory or a program.
 Inserts an empty program block if the cursor is positioned at
the end of a program block.
 Inserts a character to select a new line and the program
block is split up into two parts.
 In the G code, inserts a new line after the program block.
 In the machining step program, inserts a new line for G code.
<ALARM> - only OP 010 and OP 010C
Select the "Diagnosis" operating area.
<PROGRAM> - only OP 010 and OP 010C
Calls the "Program Manager" operating area.
<OFFSET> - only OP 010 and OP 010C
Calls the "Parameter" operating area.
<PROGRAM MANAGER> - only OP 010 and OP 010C
Calls the "Program Manager" operating area.
Menu forward key
Advances in the extended horizontal softkey bar.
Menu back key
Returns to the higher-level menu.
<MACHINE>
Calls the "Machine" operating area.
<MENU SELECT>
Calls the main menu to select the operating area.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning