Tool management
16.15 Working with multitool
16.15.8
Relocating a multitool
Multitools can be directly relocated within magazines to another magazine location, which
means that you do not have to unload multitools with the associated tools from the magazine
in order to relocate them to a different location.
When you are relocating a multitool, the system automatically recommends an empty
location. You may also directly specify an empty magazine location.
Procedure
690
1.
Select the "Parameter" operating area.
2.
Press the "Magazine" softkey.
3.
Position the cursor at the multitool that you wish to relocate to a
different magazine location.
4.
Press the "Relocate" softkey.
The "... relocate from location ... to location ..." window is
displayed. The "Location" field is pre-assigned with the number of
the first empty magazine location.
5.
Press the "OK" softkey to relocate the multitool to the
recommended magazine location.
OR -
Enter the required magazine number in the "...magazine" field
and the required magazine location number in "Location" field.
Press the "OK" softkey.
The multitool with the tools is relocated to the specified magazine
location.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning