Simulating machining
5.6 Graphical display
5.6
Graphical display
Figure 5-1
Active window
The currently active window has a lighter background than the other view windows.
Switch over the active window using the <Next Window> key.
You can change the workpiece display here, e.g. increase or decrease the size, turn it and
move it.
Some of the actions that you perform in the active window also have a simultaneous effect in
other view windows.
Display of the traversing paths
● Rapid traverse = red
● Feed = green
190
2-window view
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning