Siemens SINUMERIK 840D sl Operating Manual page 650

Tool management
16.5 Tool list
Further parameters
If you have set up unique cutting edge numbers, these are displayed in the first column.
Column heading
D no.
SN
SC
You use the configuration file to specify the selection of parameters in the list.
References
Information on the configuration and setting up of the tool list can be found in the following
references:
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
650
Meaning
Unique cutting edge number
Cutting edge number
Setup offsets
Display of the existing setup offsets
Software option
In order to be able to manage the parameter spindle direction of rotation,
coolant and tool-specific functions (M1-M4), you require the
"ShopMill/ShopTurn" option.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning