Siemens SINUMERIK 840D sl Operating Manual page 491

Corresponding to the appropriate G commands, the four machining types are assigned to
technology G group 59:
Machining type
Deselection
Finishing
Semi-finishing
Roughing
Orientation tolerance
You can enter the orientation tolerance for applications on machines with the dynamic multi-
axis orientation transformation (TRAORI).
MD note
Additional G commands that are available in conjunction with machining free-form surfaces,
are also activated in the High Speed Settings cycle.
When deselecting CYCLE832, the G groups are programmed to the settings - during the
program run time - that are declared in the machine data for the reset state.
References
For additional information, please refer to the following documentation:
Commissioning Manual SINUMERIK Operate / SINUMERIK 840D sl
Procedure
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Technology G group 59
DYNNORM
DYNFINISH
DYNSEMIFIN
DYNROUGH
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The part program or ShopTurn program to be processed has been
created and you are in the editor.
2. Select the "Miscellaneous" softkey.
3. Press the ">>" softkey.
4. Press the "High Speed Settings" softkey.
The "High Speed Settings" input window is opened.
Programming technology functions (cycles)
8.6 Further cycles and functions
491