20.4
Long-term measurement of the energy consumption
The long-term measurement of energy consumption is performed in the PLC and saved. The
values from times in which the HMI is not active are also recorded.
Measured values
The infeed and regenerative power values as well as the sum of the power are displayed for
the following periods:
● Current and previous day
● Current and previous month
● Current and previous year
Requirement
SENTRON PAC is connected.
Procedure
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
20.4 Long-term measurement of the energy consumption
1.
The "Ctrl-Energy Analysis" window opens.
2.
Press the "Long-term measurement" softkey.
The "SINUMERIK Ctrl-Energy Analysis Long-term Measurement"
window opens.
The results of the long-term measurement are displayed.
4.
Press the "Back" softkey to terminate the long-term measurement.
Ctrl-Energy
763