User variables
11.3 Displaying global user data (GUD)
Procedure
Note
After each start-up, a list with the defined UGUD variables is displayed in the "Global User
Variables" window.
580
1.
Select the "Parameter" operating area.
2.
Press the "User variable" softkey.
3.
Press the "Global GUD" softkeys.
The "Global User Variables" window is displayed. A list of the defined
UGUD variables will be displayed.
- OR -
Press the "GUD selection" softkey and the "SGUD" to "GUD6" softkeys
if you wish to display SGUD, MGUD, UGUD as well as GUD4 to GUD 6
of the global user variables.
- OR -
Press the "GUD selection" and ">>" softkeys as well as the "GUD7" to
"GUD9" softkeys if you want to display GUD 7 to GUD 9 of the global
user variables.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning