Filtering The Tool Management Lists - Siemens SINUMERIK 840D sl Operating Manual

16.10

Filtering the tool management lists

The filter function allows you to filter-out tools with specific properties in the tool
management lists.
For instance, you have the option of displaying tools during machining that have already
reached the prewarning limit in order to prepare the corresponding tools for equipping.
Filter criteria
● Only display the first cutting edge
● Only tools that are ready to use
● Only tools that have reached the prewarning limit
● Only locked tools
Procedure
...
...
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Note
Multiple selection
You have the option of selecting several criteria. You will receive an appropriate message
if conflicting filter options are selected.
1. Select the "Parameter" operating area.
2. Press the "Tool list", "Tool wear" or "Magazine" softkey.
3. Press the ">>" and "Filter" softkeys.
The "Filter" window opens.
4. Activate the required filter criterion and press the "OK" softkey.
The tools that correspond to the selection criteria are displayed in the
list.
The active filter is displayed in the window header.
16.10 Filtering the tool management lists
Tool management
673