Siemens SINUMERIK 840D sl Operating Manual page 469

Clamping the spindle
For ShopTurn, the "Clamp spindle" function can be set up by the machine manufacturer.
See also
Clamping the spindle (Page 234)
Procedure
Parameters, G code program
PRG Name of the program to be generated
PL Machining plane
Milling direction


RP Retraction plane
SC Safety clearance
F Feedrate
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The part program or ShopTurn program to be processed has been
created and you are in the editor.
2. Press the "Milling", "Contour milling" and "Pocket resid. mat." softkeys.
The "Pocket Res. Mat." input window opens.
3. For the ShopTurn program, press the "All parameters" softkey if you
want to enter additional parameters.
Climbing
Conventional
mm
mm
mm/min
Programming technology functions (cycles)
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
8.5 Contour milling
mm/min
mm/tooth
rpm
m/min
469