Programming technology functions (cycles)
8.1 Drilling
Procedure
Parameters, G code program
PL
Machining plane
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Parameter
Description
Machining
Single position
position
(only
Drill hole at programmed position
for G code)
Position pattern
Position with MCALL
Z0 (only for G
Reference point Z
code)
FR (only for G
Feedrate during retraction
code)
FR (only for
Feedrate during retraction
ShopTurn)
Machining
Face C
surface
Face Y
(only for
Peripheral surface C
ShopTurn)
Peripheral surface Y
Position
At the front (face)
(only for
At the rear (face)
ShopTurn)
Outside (peripheral surface)
Inside (peripheral surface)
292
1.
The part program or ShopTurn program to be processed has been
created and you are in the editor.
2.
Press the "Drilling" softkey.
3.
Press the "Drilling Reaming" softkey.
4.
Press the "Reaming" softkey.
The "Reaming" input window opens.
mm
mm
*
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
mm/min
mm/rev
rpm
m/min
Unit
mm
*
mm/min
mm/rev
Turning