4.11.4
Searching for program blocks
Using the "Search" function, you can search for specific program blocks as well as edit
programs; you can do this in one step by replacing the text that you are searching for by a
new text.
Precondition
● The required program is opened in the mold making view.
● The "NC blocks" softkey is active.
Procedure
See also
Searching in programs (Page 150)
Replacing program text (Page 151)
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
1.
Press the "Search" softkey.
A new vertical softkey bar appears.
Machining the workpiece
4.11 Mold making view
163