Changing The Contour - Siemens SINUMERIK 840D sl Operating Manual

Parameters
β1
β2
Transition to next
element
Radius
Chamfer
Additional commands
Contour element "Pole"
Parameters
Machining
surface
(only for ShopTurn)
X
Y
Contour element "End"
The data for the transition at the contour end of the previous contour element is displayed in
the "End" parameter screen.
The values cannot be edited.
8.5.5

Changing the contour

Function
You can change a previously created contour later.
If you want to create a contour that is similar to an existing contour, you can copy the
existing one, rename it and just alter selected contour elements.
Individual contour elements can be
● added,
● changed,
● inserted or
● deleted.
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Description
End angle to Z axis
Opening angle
Type of transition
Radius

Chamfer

R Transition to following element - radius
FS Transition to following element - chamfer
Additional G code commands
Description
Face C

Face Y

Face B

Peripheral surface C

Peripheral surface Y

Position pole (abs)
Position pole (abs)
Programming technology functions (cycles)
8.5 Contour milling
Unit
Degrees
Degrees
mm
mm
Unit
mm (in)
Degrees
451