Siemens SINUMERIK 840D sl Operating Manual page 70

Setting up the machine
2.3 Modes and mode groups
Changing the channel
References
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
Channel switchover via touch operation
On the HT 8 and when using a touch screen operator panel, you can switch to the next
channel or display the channel menu via touch operation in the status display.
70
Press the <CHANNEL> key.
The channel changes over to the next channel.
- OR -
If the channel menu is available, a softkey bar is displayed. The active
channel is highlighted.
Another channel can be selected by pressing one of the other softkeys.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning