Procedure
Parameters, G code program
PRG
Name of the program to be generated
PL
Machining plane
Milling direction
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
1.
The part program or ShopTurn program to be processed has been
created and you are in the editor.
2.
Press the "Milling", "Contour milling" and "Spigot resid. mat." softkeys.
The "Spigot Res. Mat." input window opens.
3.
For the ShopTurn program, press the "All parameters" softkey if you
want to enter additional parameters.
Climbing
Conventional
mm
mm
mm/min
Programming technology functions (cycles)
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
8.5 Contour milling
mm/min
mm/tooth
rpm
m/min
475