Siemens SINUMERIK 840D sl Operating Manual page 325

Procedure
Parameters, G code program
PL Machining plane
SC Safety clearance
F Feedrate
Parameter
Machining
Position
Machining
direction
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
1. The part program or ShopTurn program to be processed has been
created and you are in the editor.
2. Press the "Turning" softkey.
3. Press the "Stock removal" softkey.
The "Stock Removal" input window opens.
4. Select one of the three stock removal cycles via the softkeys:
Simple straight stock removal cycle.
The "Stock removal 1" input window opens.
- OR
Straight stock removal cycle with radii or chamfers.
The "Stock removal 2" input window opens.
- OR
Stock removal cycle with oblique lines, radii, or chamfers.
The "Stock Removal 3" input window opens.
mm
*
Description
∇ (roughing)

∇∇∇ (finishing)

Machining position:
Stock removal direction (transverse or longitudinal) in the coordinate system
Parallel to the Z axis (longitudinal)
Programming technology functions (cycles)
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
Parallel to the X axis (transverse)
8.2 Rotate
mm/rev
rpm
m/min
Unit
325