13.7
Simulation and simultaneous recording
For more complex machining processes, you can check the result of your inputs with the aid
of the simulation, without having to traverse the axes (see Section "Simulating machining
(Page 177)"). The execution of the work steps is displayed graphically on the screen.
Note
In "Manual Machine", you can simulate a work step with an already opened and filled out
parameter screen form.
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Software option
You require the option "Simultaneous recording ShopTurn (real-time
simulation)" for the simultaneous recording of the work steps.
Working with Manual Machine
13.7 Simulation and simultaneous recording
617