Creating Screenshots - Siemens sinumerik 840D sl Operating Manual

21.7

Creating screenshots

You can create screenshots of the current user interface.
Each screenshot is saved as a file and stored in the following folder:
/user/sinumerik/hmi/log/screenshot
Procedure
Ctrl + P
Copy file
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Press the <Ctrl+P> key combination.
A screenshot of the current user interface is created in .png format.
The file names assigned by the system run in ascending order from
"SCR_SAVE_0001.png" to "SCR_SAVE_9999". You can create up to 9,999
screenshots.
1. Select the "Start-up" operating area.
2. Press the "System data" softkey and open the specified folder.
As you cannot open screenshots in SINUMERIK Operate, you must
copy the files to a Windows PC either via "WinSCP" or via a USB
FlashDrive.
You can open the files using a graphics program, e.g. "Office Picture
Manager".
Alarms, error messages, and system alarms
21.7 Creating screenshots
695