Creating Screenshots - Siemens SINUMERIK 840D sl Operating Manual

Alarms, error messages, and system alarms

10.6 Creating screenshots

10.6 Creating screenshots
You can create screenshots of the current user interface directly on the TCU.
Each screenshot is saved as a file and stored in a folder.
You can use the default storage path or specify a path yourself.
Procedure
Ctrl + P
Specifying the storage location
The storage location of the screenshots is defined in the "systemconfiguration.ini" file. The
file is on the CF card in the following directory: Siemens/sinumerik/hmi/cfg.
To change the storage location, copy the "systemconfiguration.ini" file to the "oem" or "user"
directory and change the path.
The default setting is:
[miscellaneous]
prt_screen_save_directory=/user/sinumerik/hmi/log/screenshot
Opening a file
360
Press the <Ctrl+P> key combination.
A screenshot of the current user interface is created in .png format.
The file names assigned by the system run in ascending order from
"SCR_SAVE_0001.png" to "SCR_SAVE_9999". You can create up to 9,999
screenshots.
1. Select the "Startup" operating area.
2. Press the "System data" softkey and open the HMI
Data/Logs/Screenshots folder.
You can copy the files to a Windows PC and open them there using,
e.g. the "Office Picture Manager" program.
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
HMI sl Turning