Changing The View; Enlarging Or Reducing The Graphical Representation - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
4.16 Mold making view
See also
Searching in programs (Page 114)
Replacing program text (Page 115)
4.16.5

Changing the view

4.16.5.1

Enlarging or reducing the graphical representation

Precondition
● The mold making view has been started.
● The "Graphic" softkey is active.
Procedure
...
146
1. Press the <+> and <-> keys if you wish to enlarge or reduce the graphic
display.
The graphic display enlarged or reduced from the center.
- OR -
Press the "Details" and "Zoom +" softkeys if you wish to increase the
size of the segment.
- OR -
Press the "Details" and "Zoom -" softkeys if you wish to decrease the
size of the segment.
- OR -
Press the "Details" and "Auto zoom" softkeys if you wish to
automatically adapt the segment to the size of the window.
The automatic scaling function "Fit to size" takes account of the largest
expansion of the workpiece in the individual axes.
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Universal